Universal Joint 10x zoom+640 thermal imaging+1800 meter ranging UAV

Universal Joint 10x zoom+640 thermal imaging+1800 meter ranging UAV

TH10T6LN-SE It’s integrated with a 10x optical zoom camera, a 640×512 thermal imaging and a 1500m laser range finder, with high-precision professional 3-axis stabilized system. The FOC control scheme of the device has the characteristics of high stability, small size, light weight and low power consumption. The visible light camera adopts HD SENSOR with 4 Mega effective pixels. The thermal imaging adopts 640 ×512 resolution detectors, no block design. And the LRF can measure the distance from 1500 meters. By providing ground control software, this system supports: picture in picture modes, network directly controlling of PTZ and camera, local TF card storage, network file reading and writing, two-way videos recording synchronously and pseudo color switching.

Feature

Use and operation

1 Preparation and inspection before use

• Check whether the hanging structural parts of the dual-light gimbal are normal and whether there is obvious deformation or looseness.
•  Check whether there is any dirt on the lens. If there is dirt on the lens, wipe it with a lens cloth.
• After installing the gimbal, check whether the system mechanical installation is normal.；
• Check whether the system electrical connection is normal;
• Check on the ground whether the imaging and function of the gimbal are normal.

2 Safety protection, safety signs and instructions during use

• When using the product, avoid supply voltage exceeding the allowable range and avoid using it under environmental conditions that exceed the normal working conditions of the load.

3 Operating procedures during use

• After the system is powered on normally, the drone ground station software can be used to control the system with the mouse or touch screen.

4 Detection and recording during operation

• Record problems encountered during use and save corresponding image data.

5 Operating procedures, methods and precautions after use

• After using the product, disconnect the system power supply, separate the pod from the fuselage in a static-free environment, and store it in a dry and ventilated environment. It should not be placed in the packaging box when not in use for a long time.

Company Introduction

Guangzhou gesai Aviation Technology Co., Ltd. is located in Tongda Creative Park, Jiahe Hetai Road, Baiyun District, Guangzhou. It is a high-tech enterprise specializing in the R & D, production, sales and training of multi rotor unmanned flight system. Relying on mature technology, the company adheres to the road of "leading technology and reliable quality", and has complete development, production and service capabilities from UAV system design and manufacturing to system test and flight test. The company has gathered a group of development, production and flight service personnel with rich engineering practice experience. All its key technologies are self-developed and open. These R & D technicians have the ability of composite material processing, aircraft design, various peripheral equipment and system integration. The company has developed GS series multi rotor unmanned aerial vehicles. GS series unmanned aerial vehicle is a small aircraft that can take off and land vertically, is easy to carry, has high safety performance, is easy to operate and is widely used. The products are mainly used in map mapping, geological survey, disaster monitoring, meteorological detection, air traffic control, border control, communication relay, image shooting, commercial advertising, power construction stringing, television broadcasting, aerial shooting, urban public safety, coastal defense patrol, remote sensing technology, traffic detection, meteorological monitoring, etc.

Our Services

1. We provide 1 Year Warranty. Buy with confidence.
2. If you are not satisfied when you receive your item, please return it within 14 days for a replacement or money back. Please contact me before you return it.
3. If item is defective in 3 months, We will send you a replacement without extra charger, or offer refund after we receive the defective item.
4. If item is defective after 3 months, you can still send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee.

FAQ

Q1: Do you support OEM/ODM?
A1: Yes. We can print your logo on the product.
Q2: About samples.
A2: Under normal circumstances, samples will be ready within 7 days, and 10-20 days for OEM/ODM orders. Sample fee and shipping will be charged.
Q3: What is the delivery time?
A3: For regular orders, we can ship within 15 days, for OEM/ODM, we can ship within 25-45 days (depending on the quantity). In the event of delays, we will notify you in advance of the status and resolution.
Q4: What is the minimum order quantity?
A4: There is no MOQ for wholesale (1 piece accepted), including OEM/ODM.
Q5: What are your payment terms?
A5: L/C.TT100%.
Q6: Can you reduce the shipping cost?
A6: When calculating the shipping cost for you, we always choose the cheapest and safest express. Although we have partnerships with shipping companies, we can't keep costs down because it's not us who get paid. If you think it's expensive for you. You can always make your own choice.
Q7: Return policy.
A7: If you want to replace the received item, you must contact us within 7 days after receiving the item. Returned items should be in their original condition and you should pay for additional shipping.